Ceramic Jack O Lantern Candle Holders Page Two

Page 1 Page 2

Vintage Brinns Halloween Tealight Candle Holder Silly JackO Lanterns Set Of 3 Kitschy Pumpkins

Set of 3 vintage Halloween jack-o’-lantern tealight / votive candle holders. All 3 are different – one has an owl on its head, 1 with a resting mouse and one wearing a moon and star top hat. A fun kitschy little group of retro Halloween jack-o’-lanterns – in all my searching, I have yet to find all 3 of these, collectively, from the set. Original foil stickers intact on the bottom of all three pumpkins : Brinn’s / PDH PA /made in Taiwan ROC.
In excellent vintage condition, no cracks or repairs ( the various random white spots in photos are mere light reflections, NOT paint chips). There is some evidence of prior candle “smoke markings” on the upper interior of the pumpkins- near the venting holes (pic #10) – normal for use with real candles versus fake tea lights. It has been wiped down, doesn’t interfere in any way with the appearance or function of the holders. Please see pictures up close carefully as they are part of the description and your best descriptors. Approximate dimensions – the two with animals – 6″ x 5.25″, top hat pumpkin – 5″ x 5″.
** I used a multicolor plastic tea light to demonstrate a dimmed light affect. Tea lights are NOT included but can be purchased in most dollar-stores as well as wax votive / tealight candles.
🎃Collectively, these retro cuties weigh approximately 2 lbs. before box, shipping & packing materials.

Vintage Ceramic Halloween Pumpkin Lantern Candle Holder Candy Container Bowl

Vintage Ceramic Halloween Pumpkin Lantern Candle Holder Candy Container Bowl
In great Condition
5″ x 6″
needs light attachment

Jack-o-Lantern pumpkin Halloween Fall decor Halloween decoration Three candle cups favor cups Orange pumpkin

Jack-o-Lantern pumpkin Halloween Fall decor Halloween decoration Three candle cups favor cups Orange pumpkin Fall decor autumn decor halloween

2″ opening,
2- 2 1/2″ deep
3-3 1/4″ w,
3-3 1/4″ h

Ceramic Halloween Pumpkin Tea Light Holder Window Display

A scary orange ceramic Pumpkin tealight holder

Ideal size for the windowsill, doorstep, mantelpiece etc..

approx size: 11cm x 13xm

AwesomeLarge Vintage Atlantic Mold Ceramic Jack O Lantern Pumpkin-JOL-With Lid-Can Hold Lights-1977

Just look at that awesome stem on the lid! Marked Atlantic Mold, signed and dated ’77.
Measures roughly 9.5 x 9 (with the lid)
nice weight at 4 lbs 4 oz

Carved Round Jack-o-Lantern

Carved smiling round jack-o-lantern with leaves glazed in shimmering Orange Peel with a flameless candle lighting him up. Get ready for Autumn, Halloween and Thanksgiving with this orange hand glazed pumpkin! This will be a perfect accent to your table or bookshelf or front porch! Pumpkin measures about 8 inches tall and 6″ wide.

Halloween Pumpkin Decoration, Luminary – Candle holder, Tea Light – Jack o lantern -Handmade on the Potters Wheel – Ready to Ship

a ” Toothy” Jack — just out of the kiln

approx. size — 6″ x 4.5″

Ceramic Jack-o’-lantern

Handcrafted clay lantern to Halloween. Will be nice decoration to your house for many years!
Common height of the lantern is about 13 cm

Halloween Pottery Pumpkins Jack-o’Lanterns tealight holder

These are 4 pumpkins carved into Jack-o’Lanterns for the purpose of holding either tealights or votive candles. They are each unique in their own way. Numbers 1 & 2 are happy pumpkins with devilish eyes, number 3 is a happy/sad face (smile on half/frown on half) & number 4 is sort of a snaggle-toothed fellow. They have a couple benefits over regular Jack-o’Lanterns: you don’t have to buy a new one each year & they don’t spoil! If you like to display them beyond Halloween, on the mantle or someplace, you can just turn their faces to the wall (but, yeah, then you wouldn’t see the candle, I know – just giving some decor hints 😉 ). Their dimensions are written on their individual photos.

Ceramic Jack-o-lan-cube LED lantern night light

BOO! These ceramic Jack-o-lan-cubes have many uses. Add them to a halloween party place setting, place them in a line in a window or switch them on for a night light at bedtime.

Please note the listing is for one lantern. Each of the pumpkins measure roughly 3″ x 3″ x 3″ and hold a flickering LED tea light. Note: DO NOT use real tea lights or candles because the ceramic will get too hot to the touch.

Ceramic Jack-o-lan-tube LED lantern night light

BOO! These ceramic Jack-o-lan-tubes have many uses. Add them to a halloween party place setting, place them in a line in a window or switch them on for a night light at bedtime. Each of them measure roughly 2.5″ in diameter and hold a flickering LED tea light (one included) Note: DO NOT use real tea lights or candles because the ceramic will get too hot to the touch.

Ceramic jack_o_lantern

Candle burner for the fall season. About 3 inches tall so small candle.

Pumpkin With Ghost Candleholder

This listing is for a ceramic pumpkin with
ghost candle holder.

This cute little candle holder would nicely
accent your Halloween decor.

Cute as a centerpiece, kitchen, bookcase,
etc.

Dimensions are 3.5 in. tall x 4 in. x 2.5 in.

Pottery pumpkin scary face

Hand thrown pottery pumpkin. Jack o lantern is hand carved. Stamped with initial emblem. Battery operated candle included. Felt pads on bottom. Approximately 6″ wide and 6″ tall. Can be used with tealight candles- but pottery does get hot- use caution.

Happy pottery pumpkin

Hand thrown pottery pumpkin. Jack O Lantern cut out by hand. Stamped with initial emblem. Felt pads on bottom. Battery operated candle included. Can also be used with tealight candles, but pottery does get hot- use caution. Approximately 6″ wide and 6″ tall.

Naughty pottery pumpkin

Hand thrown pottery pumpkin. Face cut out by hand. Stamped with initial emblem. Battery operated candle included. Felt pads on bottom. Can be used with tealight candles, but pottery does get hot- use caution. Approximately 6″ wide by 6″ tall.

Vintage Paper Sack Jack-o-lantern ,Small Halloween Jack-o-lantern Paper Sack Decor,Rustic Halloween Decor

This is such a Sweet Small Paper sack Jack-o-lantern Ceramic Piece…. I Aged it Years Ago and It is in Great Shape…..Such a Sweet Ugly Guy….. Easy for a Tea Light to pop right in….. No Chips Nicks or Cracks…..
The Cutie Measures: 4″ tall 4″ wide and 3″ Deep

Halloween decoration outdoor indoor ceramic jack o lantern pumpkin whimsical scared face pumpkin for kids Halloween gifts for her outdoor

Halloween decoration outdoor indoor ceramic jack o lantern pumpkin whimsical scared face pumpkin for kids Halloween gifts for her outdoor

7″h, 4 3/4″ w, 5 1/2 front to back.

Opening for candle or tea light

Handmade Large pouddy halloween pumpkin with tea lighting

THIS OOAK UNIQUE PUMPKIN/JACK-O-LANTERN IS HAND POURED, CARVED, CLEANED, FIRED, AND PAINTED BY ME. EACH PUMPKIN IS CARVED SLIGHTLY DIFFERENT, BRUSH STROKES ARE ALSO SLIGHTLY DIFFERENT THEREFORE IT IS A ONE OF A KIND PUMPKIN. IT MEASURES 11 ” TALL, 9″ WIDE, AND 9.5″ DEEP. IT WAS DESIGNED TO HAVE A BATTERY OPERATED TEA LIGHT PUT IN IT. IT IS PAINTED WITH DUNCAN ACRYLIC STAINS AND SEALED WITH DUNCAN SUPER MATTE SEALER. MADE IN USA.

Handmade ceramic small pumplkin with tea light

This handmade ceramic pumpkin was poured, cleaned, fired, and painted by me at my shop. It stands approximately 4 inches tall, 4 1/2 inches in diameter. It comes with a tea light for lighting of the pumpkin. Made in USA.

Handmade ceramic large smiling pumpkin with light kit

This handmade ceramic pumpkin was poured, cleaned, fired, and painted by me at my ceramic shop. It stands approximately 10 inches high, 7 inches wide, and 8 inches deep. It is unique because of the one of a kind carving design and the dry brushing technique used in drybrushing the final color on. It is sealed with Duncan matte sealer and has a light kit with an on/off switch in the line. It has an orange blinking bulb in it. Made in USA.

Page 1 Page 2

Leave a Reply

Your email address will not be published. Required fields are marked *